GPO-3 Sheet ,Red GPO3 Sheet ,Fiberglass laminate GPO-3
is A fiberglass reinforced polymer laminate. This material
is the industry standard for flame & arc/track resistant electrical
components. GP03 also offers an excellent combination of high strength,
flame resistance, and low smoke, flame, & toxicity generation.
GP03 is a NEMA approved material per NEMA procedure NEMA LI-1..
Combines high arc and track resistance, highly flame resistant. For use on 2500+ voltage equipment. 94V-O flame retardance rating. 22,100 PSI flexural strength. Red in colour
GPO-3 Sheet ,Red GPO3 Sheet ,Fiberglass laminate GPO-3
GPO-3 laminate performs well in electrical applications that require
high arc and carbon track resistance as well as flame resistance,
physical strength, and moderate heat resistance. Grade GPO-3 laminate
is used extensively in the making of phase and end barriers, insulating
supports, bus bar supports and mounting panels in switchgear and
other types of electrical apparatus. Grade GPO-3 is a UL recognized
product with a temperature index of 120 degrees celsius electrical
and 140 degrees celsius mechanical. Grade GPO-3 is produced in three
standard colors: red, black, and white and is molded in thicknesses
of 1/32?to 2 used for general purpose electrical and/or
mechanical applications where low cost is desired. GPO-3 can withstand
higher temperatures than GPO-1 or GPO-2, and has better electrical
,GPO-3 Sheet ,Red GPO3 Sheet ,Fiberglass laminate
GPO-3 characteristics  |
|
|
|
Lamicor Grade GP-9306 |
|
|
|
Units |
ASTM Test Method |
FR Polyester Glass Laminate (GPO-3) |
MECHANICAL |
1 |
Strength to Weight Ratio |
ksi |
- |
|
2 |
Specific Gravity @73 F |
- |
D792 |
1.80 |
3 |
Tensile Strength @73 F, (ult)/(yld) |
psi |
D638 |
9000 |
4 |
Tensile Modulus of Elasticity @ 73 F |
psi |
D638 |
- |
5 |
Tensile Elongation at Break @ 73 F |
% |
D638 |
- |
6 |
Flexural Strength @ 73 F |
psi |
D790 |
21500 |
7 |
Flexural Modulus of Elasticity @ 73 F |
psi |
D790 |
- |
8 |
Shear Strength @ 73 F |
psi |
D732 |
- |
9 |
Compressive Strength, (% Deformation) @73 F |
psi |
D695 |
33000 |
10 |
Compressive Modulus of Elasticity @73 F |
psi |
D695 |
- |
11 |
Hardness, Rockwell, Scale as noted @73 F |
- |
D785 |
M-105 |
12 |
Hardness, Durometer, Shore D @73 F |
- |
D2240 |
- |
13 |
Izod Impact, (Notched) @73 F |
ft-lb/in of notch |
D256 TypeA |
8.3 |
14 |
Coefficient of Friction, (Dry vs. Steel) Dynamic |
- |
- |
- |
15 |
Limiting PV, (with 4 to 1 factor of safety applied) |
psi-ft/min |
- |
- |
THERMAL |
16 |
Coefficient of Linear Thermal Expansion @73 F |
in/in/F |
E-831 (TMA) |
- |
17 |
Heat Deflection Temperature @ 264 psi |
F |
D648 |
- |
18 |
Tg-Glass transition temperature, (Amorphous) |
F |
D3418 |
- |
19 |
Melting Point, (VS=Vicat Softening Temp.) |
F |
D3418 |
- |
20 |
Continuous Service Temperature in Air, (Max.) |
F |
- |
284 |
21 |
Thermal Conductivity |
BTU-in/hr-ft2-F |
- |
- |
ELECTRICAL |
22 |
Dielectric Strength, Short Term |
Volts/mil |
D149 |
400 |
23 |
Volume Resistivity |
ohm-cm |
D257 |
- |
24 |
Dielectric Constant @ 10E6 Hz |
- |
D150 |
4.1 |
25 |
Dissipation Factor @ 10E6 Hz |
- |
D150 |
.027 |
26 |
Flammability @ 3.1 mm unless noted |
- |
UL94 |
V-0 |
H2O |
27 |
Water Absorbtion, Immersion, 24 Hrs |
% by wt. |
D570(7) |
0.12 |
28 |
Water Absorbtion, Saturation |
% by wt. |
D570(7) |
- |
|