self extinguishing silicon rubber coated fibre glass sleeving ;
PRODUCT DESCRIPTION
¡¤ Silicone fiber glass braid material
¡¤ High temperature resistance£¨200¡æ£©
¡¤ High voltage withstand£ºFSG-1 1200V,FSG-2 1500V
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
FSG-3 2500V,FSG-4 4000V
¡¤ Flame retardant UL224 VW-1
¡¤ Good machanical properties
¡¤ Good insulation
¡¤ Good flexibility
¡¤ Passed the UL testing
APPLICATION
Be Popular used in H-grade motors,home electrical appliances dieletric, ect. |
Performance |
Index |
Bending after heating |
The coating has no fracture that can be seen or peel off,the primary color obviously can be seen, 5¡æof 260¡Àof test temperature, 48¡À1 hours |
Bending at the time of the low temperature |
The coating has no fracture that can be seen or peel off,the primary color obviously can be seen, test temperature - 5¡æof 70¡À, 10 hours for 60¡À |
Spreading of flame |
Heavy one second most,mark flag any time of three test should burn,burn or scorching hot particle should light the cotton. |
Temperature of 20000 hours of the hot life-span index |
200¡æ |
standard inside diameter
mm |
tolerance about inside diameter
mm |
Wall Thickness
mm |
Package |
M/Roll |
M/Tray |
0.5 |
+0.1 |
0.18 |
100 |
1000 |
0.8 |
+0.1 |
0.18 |
100 |
1000 |
1.0 |
+0.1 |
0.18 |
100 |
1000 |
1.5 |
+0.2 |
0.18 |
100 |
1000 |
2.0 |
+0.2 |
0.18 |
100 |
600 |
2.5 |
+0.2 |
0.18 |
100 |
500 |
3.0 |
+0.3 |
0.23 |
100 |
400 |
3.5 |
+0.3 |
0.23 |
100 |
200 |
4.0 |
+0.3 |
0.23 |
100 |
200 |
4.5 |
+0.3 |
0.28 |
100 |
200 |
5.0 |
+0.4 |
0.28 |
100 |
200 |
5.5 |
+0.4 |
0.28 |
100 |
200 |
6.0 |
+0.4 |
0.32 |
100 |
200 |
7.0 |
+0.6 |
0.32 |
100 |
100 |
8.0 |
+0.6 |
0.32 |
50 |
100 |
9.0 |
+0.6 |
0.32 |
50 |
100 |
10 |
+0.8 |
0.52 |
50 |
100 |
11 |
+0.8 |
0.52 |
25 |
100 |
12 |
+0.8 |
0.52 |
25 |
100 |
13 |
+0.8 |
0.52 |
25 |
|
14 |
+0.8 |
0.52 |
25 |
|
15 |
+0.8 |
0.52 |
25 |
|
16 |
+0.8 |
0.52 |
20 |
|
18 |
+0.8 |
0.52 |
20 |
|
20 |
+0.8 |
0.52 |
20 |
|
25 |
+0.8 |
0.52 |
20 |
|
30 |
+0.8 |
0.52 |
20 |
|
Double-layer glass fibre of silicon tubing ----FIBREGLASS inside and silicon rubber outside
¡¡
Double-layer FIBREGLASS of silicon rubber tubing ----FIBREGLASS inside and silicon rubber outside, have been weaved as tubing withalkali FIBREGLASS yarn, coated with silicon rubber in high temperature. It is better insulating speciality than FIBREGLASS sleeve pipe of silicone, put out itself and flexibility, apply to electrical machinery , household appliances , heating equipment ,etc. and insulating protection extensively.
Technology index
Voltage-resistance £º 4KV 7KV 10KV
Temperature-resistance £º¨C 10-+200 ¡æ
Flammablity £º UL VW-1
Voiume circuit:10¡± ¦¸ cm
Off-self time: 10s
Specification (mm) |
Wall thickness mm) |
Inside diameter |
Tolerance |
4000V |
7000V |
10000V |
0.5-2.5 |
0.20¡À0.05 |
0.40¡À0.02 |
0.50¡À0.05 |
0.60¡À0.05 |
2.5-3.0 |
0.25¡À0.05 |
0.40¡À0.02 |
0.55¡À0.05 |
0.65¡À0.05 |
3.5-5.0 |
0.35¡À0.05 |
0.45¡À0.02 |
0.60¡À0.05 |
0.70¡À0.05 |
6.0-9.0 |
0.50¡À0.10 |
0.60¡À0.05 |
0.70¡À0.05 |
0.75¡À0.05 |
10.0-12.0 |
0.70¡À0.15 |
0.65¡À0.05 |
0.80¡À0.08 |
0.85¡À0.08 |
13.0-20.0 |
0.80¡À0.15 |
0.90¡À0.05 |
0.95¡À0.08 |
0.95¡À0.08 |
Braid Colours:white¡¢red¡¢black¡¢yellow¡¢blue¡¢green etc. |
|
Double-layer FIBREGLASS of silicon rubber tubing----glassfiber outside and silicon rubber inside 
¡¡
Double-layer FIBREGLASS of silicon rubber tubing----glassfiber outside and silicon rubber inside , is after managing tubing by the silicon rubber, and weave FIBREGLASS and deal with high temperature of silicone resin again , have extremely good insulating protective action, used in electrical machinery , electrical home appliances , steam engine , high temperature washing machine , lamps and lanterns lamp decoration,etc. and insulating protection mainly.
Technology index
Voltage-resistance :7KV-10KV
Temperature-resistance: ¨C 10-+ 200 ¡æ
Flammablity :UL VW-1
Off-self time: 10S
Voiume circuit: 10¡± ¦¸ cm
Specification(mm) |
Wall thickness(mm) |
Insisde diameter |
Tolerance |
1.0-2.5 |
0.20¡À0.05 |
0.80¡À0.05 |
3.0-5.5 |
0.30¡À0.05 |
0.90¡À0.05 |
6.0-7.0 |
0.40¡À0.05 |
1.00¡À0.05 |
8.0-9.0 |
0.50¡À0.10 |
1.10¡À0.05 |
10.0-12.0 |
0.50¡À0.15 |
1.50¡À0.05 |
12.0-20.0 |
0.50¡À0.15 |
2.00¡À0.05 |
Braid Colours:white¡¢red¡¢black¡¢yellow¡¢blue¡¢green etc |
|
Fiberglass Braided Sleeving
Fiberglass (FG) sleeving is composed of a tightly braided, highly flexible, continuous filament E glass which has been heat-treated to remove starches and oils, and to "set" the braid. FG maintains about half of its strength at temperatures up to 750¡ãC. FG is available in natural silver gray only.
FG is used in high temperature, low voltage (up to 300V) applications such as toasters, coffee makers, and other small heating appliances. Its flexibility and expandability allows for use over irregular shapes. It is also used in wire harness assemblies as well as for thermal protection of insulated wires against damage from external heat sources. It is also an ideal choice for sleeving applications where varnishing or vacuum pressure impregnation is used.
Saturated Fiberglass (FGS) sleeving is made in a similar fashion as the FG, except after heat treatment, it is saturated with acrylic resin formulated to provide excellent fray resistance when cut. The resin also stabilizes the fibers, which reduces operator skin irritation. Although the acrylic resin degrades at operating temperatures above 200¡ãC, FGS continues to provide thermal and space factor insulation as high as 650¡ãC with continuous operation at 450¡ãC.
FGS is used in high temperature, low voltage (up to 300V) applications such as toasters, coffee makers, and other small heating appliances. Its flexibility and expandability allows for use over irregular shapes. It is also used for thermal and cut-through protection in automotive wire harness assemblies as well as track, stage and other types of lighting devices
Features: |
- Thermal Class 240¡ãC
- UL VW-1
- Dielectric Grade C-3 (no dielectric guaranteed)
- Resists solvents and engine fluids
- 1:1.25 expansion ratio
- Lightweight and flexible
- Compliant with the European Union's Restrictions on the use of Hazardous Substances (RoHS) Directive
|
- Cuts easily with scissors
- High abrasion resistance
- Contains no asbestos
- Non corrosive to metals
- Excellent resistance to moisture, fungus and chemical attack
- Continuous operating temperature -94¡ãF to 1200¡ãF
|
|
|